Home > RF Admittance Level Switch >

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch

Product Categories

Radar Level Transmitter [435]
Ultrasonic Level Transmitter [95]
Magnetic Level Transmitter [59]
Pressure Sensor Transmitter [137]
Tuning Fork Density Meter [31]
Tuning Fork Level Switch [89]
RF Admittance Level Switch [53]
Rotary Paddle Level Switch [40]
Temperature Transmitter Sensor [29]
Mass Flow Meter [16]
Turbine Flow Meter [49]
Electromagnetic Flow Meter [49]
Ultrasonic Flow Meter [13]
Magnetostrictive Level Gauge [48]
RF Admittance Level Transmitter [85]

Xi'an Dehou Electronic Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch

Name: NYSPL863 High temperature anticorrosion explosionproof static level switch RF admittance level switch
Brand: NUOYING
Price: 259 USD

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch Manufactures

Brand Name : NUOYING

Model Number : NYSP-L863

Certification : CE, SIL, ATEX

Place of Origin : Xi'an,Shaanxi,China

MOQ : 1pcs

Price : $259 to $299/pcs

Payment Terms : T/T

Supply Ability : 1000pcs per month

Delivery Time : 5-7 working day

Packaging Details : 40*30*30cm

Grade : Industrial

Warranty : 12 months

Customized support : OEM, ODM

Applications : liquid, particle, solid position control, especially for high temperature

Operating temperature : >+260C

Power supply : 24VDC,220VAC

Bar material : 316, ceramic (optional)

Procedure linkage : thread, flange (optional)

Signal Output : 4~20 mA,0~1000Hz,RS485 Modbus RTU

Probe length : 500mm (customizable as required)

Process pressure : 0~2.0MPa

Output relay : double pole, double throw (DPDT) output,5A,24VDC or5A,220VAC

Protection/explosion class : IP67/ExialCT6 (optional)

Contact Now

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch

NYSP-L863 Radio Frequency Admittance Switch

Overview

Product Parameters

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch

Typical application	Liquid, powder, particle, solid level control
Probe material	304, PTFE (optional)
Power supply	24VDC, 220VAC (optional)
Operation temperature	＞260℃
Joint material	316L, stainless steel, Hastelloy
Working pressure	0~2.0MPa
Process connection	Thread, flange (optional)

Products Description

NYSP-L863 RF Admittance Level Switch Working Principle

The principle of operation of radio frequency conductivity level switches is based on radio frequency (RF) capacitance technology.

A radio frequency is applied to the probe and the influence caused by the surrounding environment is determined by continuous analysis. Because all materials have a dielectric constant and their conductivity are different from air, the total impedance reflected by the small capacitance shift changes when the probe is in contact with the material. Because the energized probe and the vessel wall constitute the two pole plates of the capacitor, the insulator of the probe and the surrounding air become dielectric materials, and the capacitive effect is enhanced when the air (whose dielectric constant is 1.0) is replaced by any other material (dielectric constant > 1). Thus, the impedance of the application is changed. That is, the change in capacitance value causes a change in impedance. This effect is measured by the circuit and then compared to the reference reference frame established by the sensitivity setting (circuit). The correct setting of the RF Admittance Level Switch sensitivity affects the correct change in sensor output. The probe's Nul1-KoTeTM circuitry allows the measurement circuit to ignore material buildup on the probe that would otherwise cause a sensitivity failure. The Nul1-KoTeTM circuit is excited with the same radio frequency potential as that applied to the sensing probe. Since the current cannot flow at the same potential, the Nul1-KoTeTM circuit isolates the current flow that normally flows from the energized probe through the stacked material to the vessel wall. This way the material around the energized probe is measured, not the stacked material.

Product details

Product feature

Various application

Cooperative customers

Product certificate

NYSP-L863 High temperature anti-corrosion explosion-proof static level switch RF admittance level switch Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Xi'an Dehou Electronic Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!